|
|
|
 
 
 
 
ID:
 
Password:
 
 





 
Factory apparatus
 
 
 
Equipment
  Equipment:
Horizontal steam boiler
Horizontal steam boiler, except burn relevant automatic control systems, assistance equipment, and soft water treatment medicines equipment and automatically controlled valve, While making one in the foaming of the rubber, getting stable to guarantee an important link most quality to foam size, give commitment of customer too. Channel into the automatic horizontal steam boiler, is it through intact production programming, promote automation, lower costs, is it can produce, guarantee boiler performance's security to improve on making Cheng to hope. Relevant important specification of the steam boiler:
Analogous to evaporation capacity: 1500kg/hr
Heat transfer area: 9.9m2
Supreme pressure: 10kgf/cm

IR Heater With Conveyer
Molding by press out the rubber. Forming Through the channel of IR heater. 1. Heater system: Temperature adjustable heater set to both side of up and down of every stage. Let the product forming by uniform heating that is guarantee the precision. 2. Temperature range: 10℃─300℃(MAX). It was suit to heat up every kind of puff up or non-puff up rubber. 3. Thermo insulation structure: By using the high temperature resistant rock wool with 100 mm thick to isolate heat transfer to out side and it can prevent deform temperature let the product out of shape.

Cooling cutting machine with conveyer
Rolling mill the raw materials to required thickness and blowing with high power industrial fan to forced heat sink on line. By using cutting machine cut to certain width as: as follow:
1. Size of rubber strap: 800mm X 12mm
2. Cutting width: 50mm
3. Cutting number: 2 to 15 cut
(The working specification can be adjusted)

The open mixer
Mixing the raw rubber with certain rate of additive. Through rolling mill rolled over turn dozen times. Let the raw rubber and additive combined. Rolling to certain thickness and width roll out to cooling conveyor.

The cold material injection machine 65m/m
It is under certain condition inject the raw rubber to the mold.
1. Our company can carry on customer's demand; carry on the development of the mold.
2. Special specification or different ingredient rubber injection mold can be development through cooperate.
3. Puff up material, non puff up material, different ingredient material of hardness, can be develop and product together.

The cold material injection machine 100m/m
It is under certain condition inject the raw rubber to the mold.
1. Our company can carry on customer's demand; carry on the development of the mold.
2. Special specification or different ingredient rubber injection mold can be development through cooperate.
3. Puff up material, non puff up material, different ingredient material of hardness, can be develop and product together.

Cutting machine
The machine for special-purpose rubber safety valve which will be cut off burr after forming.
1. Special precision rubber parts are cut off burr accurately. To improve the additional value of the products.
2. Rubber on processing, when there are the appearance or other special demands, It can be discuss and develop together.


4000 cc vertical rubber injection
Injection molding was set the certain condition. Than inject the rubber gum through the injection mold.
1. Our company can develop the mold which was depending on customer required.
2. The special specification and deferent ingredient of rubber molding can be development through cooperate.
3. Puff up, non puff and different hard of composite material can be development through cooperate.

Vacuum forming machine
Put raw materials and mold into vacuum machine for forming. It will reduce the bubble inside the finished product. To make the finished product practical and good appearance. There is one of 100 tons, two of 200 tons, five of 250 tons and one of 350 tons.

Mold cleaning machine
Our company is regarded the mold of customer as ourselves, It will obey the ISO standard to operate. After certain time of forming the mold will be finished and maintained. Keep the mold in best work condition. When little size product of precision mold to clean and maintain its cave. Our company utilizes the special-purpose mold cleaning machine, offer the best shaping products quality to the customer